Bottom Brackets

PID PRODUCT DESCRIPTION

BB386EVO24
386EVO 24mm
Our newest creation, which is made in the USA, is a bottom bracket that fits an 386EVO frame, such as the 2015 Ceepo® CP Viper using a Shimano Hollowtech II crank set.The 386EVO frame has a bottom bracket shell of 46mm and will work with a 24mm spindle. Our SRAM kit should be used to modify the set-up when used with a SRAM crankset.

This bottom bracket can be upgraded to our Full Stainless Steel bearing which is optimum for varied or intense conditions and use!

You can add an extra layer of protection to your Full Stainless Steel bearings by adding the CX seals to prevent dust and debris from wearing down your bearing prematurely!
$119.00
Qty:
Crank:

BB386EVO24 FSS 386EVO 24mm FSS
Our newest creation, which is made in the USA, is a bottom bracket that fits an 386EVO frame, such as the 2015 Ceepo® CP Viper using a Shimano Hollowtech II crank set.The 386EVO frame has a bottom bracket shell of 46mm and will work with a 24mm spindle. Our SRAM kit should be used to modify the set-up when used with a SRAM crankset. This bottom bracket features our Full Stainless Steel bearing which is optimum for varied or intense conditions and use! You can add an extra layer of protection to your Full Stainless Steel bearings by adding the CX seals to prevent dust and debris from wearing down your bearing prematurely!
$149.00
Qty:
Crank:
Seals:


BB30
BB30 Assembly Kit
Hawk Racing™ BB30 assembly kit comes with our standard Folmer Technology bearings.
$89.00
Qty:


BB30.FSS
BB30 Assembly Kit - FSS
The Hawk Racing™ Full Stainless Steel bearings are used for MTN and CX use, as they are designed to take maximum operation. The bearings will fit BB30 frames with BB30 crank sets.

Keep dust and debris out of your bearings by upgrading to our CX seals!!

$127.00
Qty:
Seal Type:


BB30.clip.set
BB30 Inner Retainer Clip Set
Hawk Racing's Inner Retainer Clip Set are replacement c-clips for any BB30 bottom brackets.
$3.50
Qty:


BB30.PF
BB30 Press Fit
Our new re-designed BB30PF bottom bracket (for PF30 frames) with Folmer Technology bearings has been made without the sleeve attached to one cup. This reduces the weight by 18 grams per cup set.

However, since some athletes need a sleeve, we engineered a groove into the cup to accommodate an o-ring to work with our clear plastic sleeve (sold separately - 41mm length Road or 46mm length MTB).
$119.00
Qty:
Di2 Plastic Sleeve:


BB30.PF.FSS
BB30 Press Fit - FSS
Our new re-designed BB30PF bottom bracket (for PF30 frames) with Folmer Technology bearings has been made without the sleeve attached to one cup. This reduces the weight by 18 grams per cup set. However, since some athletes need a sleeve, we engineered a groove into the cup to accommodate an o-ring to work with our clear plastic sleeve (sold separately - 41mm length Road or 46mm length MTB).

This set contains our Full Stainless Steel bearings which are designed to be long lasting with variable and intense use.

Keep dust and debris out of your bearings by upgrading to our CX seals!
$157.00
Qty:
Seal Type:
Di2 Plastic Sleeve:


BB30PF.24
BB30 PressFit to 24mm
This is our new BB30PF.24 bottom bracket equipped with our standard Folmer Technology bearings. It fits the BB30 Pressfit style frames and reduces the bottom bracket to a 24mm spindle used for Shimano crank sets.

Add a SRAM kit for those using a SRAM 22/24mm crankset.
$119.00
Qty:
Crank:


BB30PF.24.FSS
BB30 PressFit to 24mm -FSS
The BB30PF.24 bottom bracket uses award winning Folmer Technology Full Stainless Steel bearings which are designed to be long lasting with varied and intense use. The cups are made using AL7075.

Keep dust and debris out of your bearings by upgrading to our CX seals. This will extend the life of your bearings.

Add a SRAM Kit to your order if using a SRAM 22/24mm crankset.

$151.00
Qty:
Crank:
Seal:


BB30.24
BB30.24 Adapter
This new product features a BB30.24 Adapter that includes Folmer Technology bearings. The Hawk Racing Adapter is compatible with all Shimano compatible road cranks having a 24mm spindle without the use of external cups.

Add a SRAM kit to your order for use with SRAM 22/24mm cranksets.

Used by the Kenda Pro Cycling team in 2011, the BB30.24 is now available to everyone.
$109.00
Qty:
Crank:
Color:


BB30.24.FSS
BB30.24 Adapter Full Stainless
This new product features a BB30.24 Adapter that includes Folmer Technology Full Stainless Steel bearings. The Hawk Racing Adapter is compatible with all Shimano compatible road cranks having a 24mm spindle without the use of external cups.

Keep dust and debris out of your bearings and extend their life by upgrading to our CX seals.

Add a SRAM kit to your order if using a SRAM 22/24mm crankset.

Used by the Kenda Pro Cycling team in 2011, the BB30.24 is now available to everyone.
$141.00
Qty:
Crank:
Color:
Seal Type:


BB90
BB90 Madone
Hawk Racing offers the TREK Madone Bottom Bracket (bearing only version). This bearing kit has been made to give you the products you need to upgrade your bicycle from a standard bottom bracket to the Folmer Technology (non-ceramic) bearings.

Add a SRAM kit to your order for SRAM 22/24mm cranksets.
$79.00
Qty:
Crank:


BB90.FSS
BB90 Madone - FSS
Hawk Racing offers the TREK Madone Bottom Bracket (bearing only version) with Full Stainless Steel bearings. This bearing kit has been made to give you the products you need to upgrade your bicycle from a standard bottom bracket to the Folmer Technology (non-ceramic) bearings.

Add a SRAM kit to your order if using a SRAM 22/24mm crankset.

Keep dust and debris out of your bearings and extend their life by adding our CX seals!

$109.00
Qty:
Crank:
Seal:


BB30PF
BBright BB 30mm crank
BBright™ for 30mm crank sets is our BB30PF. This bottom bracket comes equipped with either our Folmer Technology standard bearing or our Folmer Technology Full Stainless Steel bearing. You can add extra protection to your Full Stainless Steel bearing by adding the CX seals to keep dust and debris from wearing down your bearings!

This bottom bracket can also be equipped with a plastic inner sleeve if operating an electronic crank set.

Hawk Racing is a leader in non-ceramic bearing technology and has released a bottom bracket that will fit those frames such as the Cervelo R3, R5 or S5.
$119.00
Qty:
Bearing:
Di2 Plastic Sleeve:


BBRight.SHI
BBright Pressfit 46/24 BB
BBright™ is a new bottom bracket dimensional standard. Hawk Racing is a leader in non-ceramic bearing technology and has released a bottom bracket that will fit those frames such as the Cervelo R3, R5 or S5.
$119.00
Qty:
Crank:


BBRight.SHI.FSS
BBright Pressfit 46/24 BB - FSS
BBright™ is a new bottom bracket dimensional standard. Hawk Racing is a leader in non-ceramic bearing technology and has released a bottom bracket that will fit those frames such as the Cervelo R3, R5 or S5.

NOTE: Full Stainless Steel version
$151.00
Qty:
Crank:


BBS.FSS
BBS for Specialized OSBB - FSS
This new product was designed to work with the Specialized OSBB frames, such as the Tarmac and Venge frames. Our adapter includes Folmer Technology bearings and reduces the OSBB to a Shimano crank set.

NOTE: Full Stainless Steel version
$141.00
Qty:
Crank Style:
Seal Type:


BBS
BBS for Specialized OSBB
This new product was designed to work with the Specialized OSBB frames, such as the Tarmac and Venge frames. Our adapter includes Folmer Technology bearings and reduces the OSBB to a Shimano crank set.
$109.00
Qty:
Crank Style:


BB.ENG.3086
ENG threaded for 386 cranks
Hawk Racing’s newest bottom bracket is the English threaded bottom bracket compatible with BB30* cranks that have a longer spindle than a standard BB30 crank set. This set up is also known as BSA 30 bottom bracket or BB386 bottom bracket.
$129.00
Qty:


BB.ENG.x.SRAM
ENG threaded for SRAM
Our award winning bottom bracket with ENG / EURO threading for SRAM crank sets available in 8 different colors.
$119.00
Qty:
Color:
Installation Tool - BBT9:


BB.ENG.3086.FSS
ENG threaded FSS for 386 cranks
Hawk Racing’s newest bottom bracket is the English threaded bottom bracket compatible with BB30* cranks that have a longer spindle than a standard BB30 crank set. This set up is also known as BSA 30 bottom bracket or BB386 bottom bracket.

NOTE: Full Stainless Steel version
$167.00
Qty:
Seal Type:


BB.ENG.x.FSS
ENG threaded SHI / FSA - FSS
Our award winning bottom bracket with ENG / EURO threading for Shimano or FSA available in 8 different colors.

NOTE: Full Stainless Steel version
$141.00
Qty:
Color:
Seal Type:
Installation Tool - BBT9:


BB.ENG.SRAM.FSS
ENG threaded SRAM - FSS
Our award winning bottom bracket with ENG / EURO threading for SRAM available in 8 different colors.

NOTE: Full Stainless Steel version
$151.00
Qty:
Color:
Seal Type:
Installation Tool - BBT9:


BB.ENG.x
ENG/EURO for Shimano / FSA
Our award winning bottom bracket with ENG / EURO threading for Shimano or FSA available in 8 different colors.
$109.00
Qty:
Color:
19mm crank bushings:
Installation Tool - BBT9:


BB86/90/92
Integrated BB86/90/92
Hawk Racing’s integrated BB86/90/92 was designed, machined, anodized, laser engraved and assembled in Florida and replaces the old BB86/92 and BB90 version and makes them into one.
$119.00
Qty:
Crank:


BB86/90/92.FSS
Integrated BB86/90/92 - FSS
Hawk Racing’s integrated BB86/90/92 was designed, machined, anodized, laser engraved and assembled in Florida and replaces the old BB86/92 and BB90 version and makes them into one.

NOTE: Full Stainless Steel version
$151.00
Qty:
Crank:
Seal:


BB.ITL
ITL Threaded for Shimano / FSA
Our award winning bottom bracket made for Shimano/FSA cranksets and with Italian threading for frames such as the Pinarello.
$109.00
Qty:
Color:
Crankset:
Installation Tool - BBT9:


BB.ITL.FSS
ITL Threaded SHI / FSA - FSS
Our award winning bottom bracket made for Shimano/FSA cranksets and with Italian threading for frames such as the Pinarello.
$141.00
Qty:
Color:
Seal Type:
Installation Tool - BBT9:
Crankset:


SRAMKIT
SRAM Kit for ENG threaded BB
Use the SRAM Kit if you would like to use a SRAM crank set instead of a Shimano crank set with our BB2009.1 and BB2011.MTB bottom bracket.
$10.00
Qty:





© Copyright 2003-2013 Hawk Racing Inc.

Website powered by Red Lion Network

Server 17